Insulation doesn't announce that it's failing. It just quietly stops doing as much while your system works harder. Here's what to look for, and how to tell a top-up from a full replacement.
The fastest check there is. Put your head in the attic hatch and look across the floor. If the tops of the ceiling joists are visible above the insulation, you're well under the depth this climate calls for. Insulation should be deep enough that the joists are buried.
A room that runs hot in summer while the rest of the house is comfortable often has a gap, a compressed section, or missing coverage above it. Uneven upstairs temperatures in a two-story home point the same direction, especially over garages and additions.
In Central Texas, attic heat is one of the largest drivers of cooling load. Steadily rising run time and bills across seasons, with no change in rates or occupancy, is worth investigating in the attic before anywhere else.
In these cases adding new material on top traps the problem. The old insulation needs to come out and the space needs cleaning and decontamination before anything new goes in.
Deteriorating attic insulation sheds fibers and dust into a space that often contains duct runs and, in leaky systems, feeds the air you breathe. If you've noticed persistent dust in the house alongside any of the above, the attic and the duct system are worth assessing together rather than separately.
No. It traps the contamination and you’ll pay to remove both later.
Undisturbed and dry, decades. Water, pests, compression and air movement are what shorten it, not age alone.