No. Dryers must vent outdoors. A dryer moves a large volume of hot, moist, lint-laden air, and discharging that indoors creates humidity and mold problems, and with a gas dryer, it vents combustion byproducts including carbon monoxide into your home. Indoor vent kits sold for this are a bad idea regardless.
A single load pushes a substantial amount of water out of your clothes as vapor, along with fine lint that passes the screen. Vented indoors, that moisture has to go somewhere, into drywall, into framing, into your ductwork, and in Central Texas summers, where indoor humidity is already something you're managing, it's a direct feed for the conditions mold needs.
A gas dryer burns fuel, and its exhaust contains combustion byproducts including carbon monoxide. Venting a gas dryer indoors under any circumstances, with any filter or water trap, is a serious hazard. There is no product that makes this acceptable. Codes prohibit it, and the prohibition is not a technicality.
You'll find lint traps and water-bucket kits marketed for apartments and basements. They capture some lint. They do nothing about the moisture, which is the primary problem, and nothing about combustion products on a gas unit. They exist because there's demand, not because they solve it.
Also not acceptable. Both trap moisture and lint in the structure. Attic venting in particular causes mold and insulation damage.
Yes. Condenser and heat pump dryers are designed to operate without an exterior vent, which is fundamentally different from redirecting a vented dryer indoors.